A patchbay is, in many areas of wired data transmission (eg audio, telephone and video technology or computer networks) a technical device to simplify wiring, where usually several devices are connected, their compounds comfortable using short patch cable may be prepared and changed with attached to front bushings (DIN Rail Fiber Optic Patch Panel).
The main purpose of wiring is disconnected to allow the realization of different connections between the signals in a simple and cheap, avoiding the use of more complex tools switching. An early form of patchbay is with the manual telephone exchanges, in which the connections were made manually. With time, this use has been abandoned in favor ofutomatic switching systems.
The use of patchbay is rather large in entertainment industry and more particularly in television, and is also widely used in computer networks. Disconnection video signals of mobile direction. Note on left a series of panels not normalized with fittings inserted and, in blue, a rope. Each type wiring is suitable in principle to use of patchbay. Depending on type signal, changes the type cable that carries it and the type connector used. Common examples of patchbay are: Video signals over coaxial cable 75. There are different specifications depending on type video.
In common practice, in any case, the patchbay and matrix coexist, generally by cutting all the inputs and outputs of matrix. This allows to realize simple by-pass in case of emergency. There is also the advantage of not having to put in array signals used rarely, if necessary, that are still available on the patchbay.
This is useful, for example when the microphone input of a mixer, where, according to microphone often a preamplifier (integrated in mixer or external), an equalizer and a compressor in a row are connected. Each trail with each other via a socket pair distribution box is completed, the output of previous device is usually above, the input of next down.
The types of looping through is customizable with many devices from the user, it can switch to happen the exchange of individual modules or soldering. The signal is looped through to a normalized pair of sockets without plugging the cable via an internal bridge from education to entrance. If a connector is performed in one of two sockets, the bridge will be interrupted.
The great innovation introduced in our time is to be able to "tame" the light, so that it is possible to spread within a man laying cable. The use of guided light, so it does not expand in all directions, but in a very concrete and predefined has been achieved through the optical fiber, we can think like a glass pipe -glass fibers ultra delgada- protected by a insulating material serves to transport the light signal from one point to another.
There is a firm connection between all bushings, which is not interrupted by cable plugging. This makes it possible to derive from the stereo sum of mixer, the signals for a recording device. With an open configuration exists between the two jacks on no electrical contact. The patchbay or disconnector is a system that interfaces between them different sections of a wiring. Typically consists of a series of perforated panels on the back of which are radiused sections wiring. Between a hole and the other, that is, by two sections, it is possible to realize a connection via a length of cable, also called a patch cord or rope.
The main purpose of wiring is disconnected to allow the realization of different connections between the signals in a simple and cheap, avoiding the use of more complex tools switching. An early form of patchbay is with the manual telephone exchanges, in which the connections were made manually. With time, this use has been abandoned in favor ofutomatic switching systems.
The use of patchbay is rather large in entertainment industry and more particularly in television, and is also widely used in computer networks. Disconnection video signals of mobile direction. Note on left a series of panels not normalized with fittings inserted and, in blue, a rope. Each type wiring is suitable in principle to use of patchbay. Depending on type signal, changes the type cable that carries it and the type connector used. Common examples of patchbay are: Video signals over coaxial cable 75. There are different specifications depending on type video.
In common practice, in any case, the patchbay and matrix coexist, generally by cutting all the inputs and outputs of matrix. This allows to realize simple by-pass in case of emergency. There is also the advantage of not having to put in array signals used rarely, if necessary, that are still available on the patchbay.
This is useful, for example when the microphone input of a mixer, where, according to microphone often a preamplifier (integrated in mixer or external), an equalizer and a compressor in a row are connected. Each trail with each other via a socket pair distribution box is completed, the output of previous device is usually above, the input of next down.
The types of looping through is customizable with many devices from the user, it can switch to happen the exchange of individual modules or soldering. The signal is looped through to a normalized pair of sockets without plugging the cable via an internal bridge from education to entrance. If a connector is performed in one of two sockets, the bridge will be interrupted.
The great innovation introduced in our time is to be able to "tame" the light, so that it is possible to spread within a man laying cable. The use of guided light, so it does not expand in all directions, but in a very concrete and predefined has been achieved through the optical fiber, we can think like a glass pipe -glass fibers ultra delgada- protected by a insulating material serves to transport the light signal from one point to another.
There is a firm connection between all bushings, which is not interrupted by cable plugging. This makes it possible to derive from the stereo sum of mixer, the signals for a recording device. With an open configuration exists between the two jacks on no electrical contact. The patchbay or disconnector is a system that interfaces between them different sections of a wiring. Typically consists of a series of perforated panels on the back of which are radiused sections wiring. Between a hole and the other, that is, by two sections, it is possible to realize a connection via a length of cable, also called a patch cord or rope.
About the Author:
You can visit dinrailfiberoptics.com for more helpful information about Guide To DIN Rail Fiber Optic Patch Panel.
0 Comments:
Post a Comment